The operation of VINX-120- HDMI-ENC and VINX-110-HDMI-DEC can be expanded from a simple point-to-point application to unlimited endpoints for the ultimate in virtual matrix switching, digital signage and signal extension. The extenders include our Advanced EDID Management system and decoders are capable of scaling the video signal up to the maximum supported resolution of 4K UHD @ 30 Hz. RS-232 and IR control channels are supported. The built-in USB ports support KVM function and can also handle USB 2.0 mass storage. The units are HDCP compliant.
One of the most popular of the unique features of VINX is the Video Wall setup, reducing the time needed to install a video wall to a fraction of the time needed with other systems. The feature options include gap and bezel adjustment, which can be performed in batch.
- Video Wall Processing
- Adjustable video stream bitrate
- Scaling of video signals to match the properties of the target display/sink
- Extension distance up to 100 meters with CAT5e or CAT6
- Compact and silent design
- USB KVM (HID) extension
- Command injection on RS-232 and IR ports
- 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- Advanced EDID Management
- Intuitive control software for device configuration
- Device control via Ethernet (TCP/IP)
- Built-in website for device configuration
- Bi-directional RS-232 extension (pass-through)
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Firmware upgrade through Ethernet
- HDCP 2.2 and HDCP 1.4 compliant
- Status LED for video signal detection
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- External universal power adaptor
- Mounting options for rack, furniture or truss
Specifications | |
Component type | Decoder (Receiver) |
Max. Image Resolution | 3840 x 2160 @30Hz |
Video Interface | HDMI Female (Out) |
Audio interface | None |
Scaling | Yes (Automatic or Custom) |
Video Wall Wizard | Yes |
Video delay: | 1.1 frames (source to sink) |
EDID emulation: | Transparent EDID |
EDID memory: | Transparent EDID |
HDCP | Yes, HDCP 2.2 |
USB Device | 4× USB Type A |
Network Interface | RJ45 Female |
Switch | 4 Position Dip Switch |
IR | 3.5 mm Jack Female (IR In) |
RS-232 | RJ12 Female |
Local Power | DC 5V |
Power-over-Ethernet (PoE) | No |
Acoustic Noise | 0 dB |
Power consumption: | 5 W (max) |
Operation Temperature | 0-40°C |
Storage Temperature | -20-60°C |
Humidity | 0-90% RH, Non-condensing |
Weight | 370g |
Housing | Metal Enclosure |
Dimensions (L x W xH) | 115 x 100.4 x 26 mm |
Rack mountable: | Yes (1/4 RU width) |
Compatible with VINX Power Tray | Yes |
Safety/Emission | CE, FCC |
Part Code
VINX-110-HDMI-DEC
Recently viewed product
You can control fully on this carousel from store admin as describe in above section