
Provides a very simple and reliable solution for extending uncompressed ultra high-definition video, audio, and control signals up to 330 feet (100 meters) over a single CAT type twisted pair cable. Supports Full HD, Ultra HD, 2K, and 4K video resolutions.
The Crestron 4K HDMI over HDBaseT Extender (HD-EXT3-C) delivers a professional-grade digital HD AV signal extension solution for use in the home, classroom, auditorium, or corporate boardroom. Without any special setup or configuration, the HD-EXT3-C enables the transmission of ultra high-definition digital video and audio, plus RS-232 and IR control, over wire runs up to 330 feet (100 meters) using a single CAT type twisted pair cable.[1]
NOTE: The HD-EXT3-C is composed of one HD-TX3-C transmitter and one HD-RX3-C receiver. These components are only sold as part of the HD-EXT3-C package.
4K Ultra HD Signal Extension
Using HDBaseT technology, the HD-EXT3-C allows for the extension of uncompressed HDMI signals over a single CAT type twisted pair cable. In addition to HDMI, it is also compatible with DVI and DisplayPort Multimode sources, and DVI display devices.[2] Without relying on signal-degrading compression or inferior HDMI signal boosting, HDBaseT reliably transports the full resolution signal from source to display — intact and uncompromised.
The HD-EXT3-C handles uncompressed Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for 3D, Deep Color, and HDCP 2.2. Audio capabilities include support for high-bitrate 7.1 audio formats like Dolby TrueHD and DTS-HD Master Audio™ as well as uncompressed linear PCM. All signals are transported over a single CAT type cable, supporting 1080p, WUXGA, and 2K signals at distances up to 330 feet (100 m) using Crestron DM Ultra or DM 8G Cable, or third-party CAT5e. Higher resolutions up to UHD and 4K are supported at distances up to 330 feet (100 m) using DM Ultra Cable, 230 feet (70 m) using DM 8G Cable, or 165 feet (50 m) using CAT5e.[1]
...And Control Too!
In addition to video and audio, the HD-EXT3-C provides for the extension of IR and bidirectional RS-232 control signals for a true one-wire AV interface solution.
Uncompromised and Uncomplicated
Crestron HDMI over HDBaseT products afford a very dependable signal extension solution that’s simple to implement. No special configuration or programming is required — just connect your source and display and enjoy high-quality video and audio from across the room — or the other end of the house.
The HD-EXT3-C is composed of one transmitter and one receiver (HD-TX3-C and HD-RX3-C, both included). The transmitter can be mounted in a single-gang wall box, or attached to any flat surface or inside an equipment rack. The compact receiver can be mounted discreetly behind a display device or wherever else it needs to go. Linking the two components requires just one CAT type cable[1]. Crestron offers the cable and connectors for a complete, easy, and reliable wiring solution. A range of professional AV interface cables and wall plates is also available to complement the HD-EXT3-C for a total custom installation solution.
- HDBaseT Certified 4K Ultra HD signal extender
- Extends uncompressed digital video, audio, and control signals over a single CAT type twisted pair cable [1]
- Supports cable lengths up to 330 ft (100 m) for all resolutions up to 4K and Ultra HD using DM Ultra cable [1]
- Supports cable lengths up to 330 ft (100 m) for 1080p, WUXGA, and 2K using DM 8G cable or CAT5e [1]
- Supports cable lengths up to 230 ft (70 m) for 4K and UHD using DM 8G cable, or 165 ft (50 m) using CAT5e [1]
- Compatible with HDMI, DVI, and DisplayPort Multimode sources [2]
- Compatible with HDMI and DVI display devices [2]
- Supports Dolby TrueHD, DTS-HD, and uncompressed 7.1 linear PCM audio
- HDCP 2.2 compliant
- Passes CEC and EDID
- Includes universal IR repeater up to 455 kHz
- Extends bidirectional RS-232 up to 115.2k Baud
- 24VDC power pack included [3]
- Available in white or black
- No programming or configuration required
Audio | ||
Input Signal Types | HDMI (DisplayPort Multimode compatible [2]) | |
Output Signal Types | HDMI | |
Formats | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels |
|
Communications | ||
RS-232 | Extends 2-way serial device control signals up to 115.2k baud | |
IR | Extends 1-way IR device control signals up to 455 kHz | |
HDMI | Passes HDCP 2.2, EDID, & CEC | |
Connectors – HD-TX3-C Transmitter | ||
HDMI IN | (1) 19-pin Type A HDMI female; HDMI digital video/audio input; Also supports DVI or Displayport Multimode [2] |
|
IR IN | (1) 2-pin 3.5mm detachable terminal block; IR repeater input port; IR signal input up to 455 kHz |
|
COM | (1) 3-pin 3.5mm detachable terminal block; Bidirectional RS-232 port; Up to 115.2k baud, software handshaking support |
|
24VDC 0.75A (rear) | (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input (PW-2407WU power pack included) [3] |
|
Ground (rear) | (1) Flying lead, chassis ground connection | |
HDBaseT OUT (rear) | (1) 8-pin RJ45 female, shielded; Connects to the HDBaseT IN port of the HD-RX3-C receiver via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [1] |
|
Connectors – HD-RX3-C Receiver | ||
IR OUT | (1) 2-pin 3.5mm detachable terminal block; IR repeater output port; IR output up to 455 kHz |
|
COM | (1) 3-pin 3.5mm detachable terminal block; Bidirectional RS-232 port; Up to 115.2k baud, software handshaking support |
|
G | (1) 6-32 screw, chassis ground lug | |
HDMI OUT | (1) 19-pin Type A HDMI female; HDMI digital video/audio output; Also supports DVI[2] |
|
HDBaseT IN | (1) 8-pin RJ45 female, shielded; Connects to the HDBaseT OUT port of the HD-TX3-C transmitter via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [1] |
|
PWR 24VDC 0.75A | (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input (PW-2407WU power pack included) [3] |
|
Controls & Indicators – HD-TX3-C Transmitter | ||
PWR/LINK | (1) dual-color amber/green LED, indicates operating power supplied via local power pack or HD-RX3-C[3], and indicates HDBaseT link status and HDMI input signal presence |
|
HDBaseT OUT (rear) | (2) LEDs, green LED indicates link status, amber LED indicates video and HDCP signal presence |
|
SW1 (side) | (1) slide switch, enables hot plug detect | |
Indicators – HD-RX3-C Receiver | ||
PWR | (1) green LED, indicates operating power supplied via local power pack or HD-TX3-C [3] |
|
HDBaseT IN | (2) LEDs, green LED indicates link status, amber LED indicates video and HDCP signal presence |
|
Power Requirements | ||
Power Pack | 0.75 Amp @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU, included [3] |
|
Environmental | ||
Temperature | 32° to 104°F (0° to 40°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | HD-TX3-C: 2 BTU/hr; HD-RX3-C: 11 BTU/hr |
|
Enclosure – HD-TX3-C Transmitter | ||
Construction | Metal, black finish with white or black polycarbonate label overlay | |
Flush Wall Mount | 1-gang mountable in an extra-deep electrical box (2-1/2 inch deep minimum), requires decorator style faceplate (not included) |
|
Surface Mount | Surface mount bracket included | |
Rack Mount | Attachable to a single 19-inch EIA rack rail | |
Enclosure – HD-RX3-C Receiver | ||
Construction | Aluminum w/polycarbonate label overlay and (4) integral mounting flanges | |
Mounting | Freestanding, surface mount, or attach to a single rack rail | |
Dimensions | ||
HD-TX3-C Transmitter | *Height:* 4.12 in (105 mm); * Width:* 1.72 in (44 mm); * Depth:* 2.35 in (60 mm) |
|
HD-RX3-C Receiver | *Height:* 1.43 in (37 mm); * Width:* 3.91 in (100 mm); * Depth:* 4.70 in (120 mm) |
|
Weight | ||
HD-TX3-C Transmitter | 5.8 oz (165 g) | |
HD-RX3-C Receiver | 11.6 oz (330 g) |
Part Code
HD-EXT3-C-B_SYSTEM
Recently viewed product
You can control fully on this carousel from store admin as describe in above section