Crestron HD-MD-4K-200 KIT 4K 2x1 Scaling Auto-Switcher and DM Lite Extender over CATx Cable

Stock Alert:Click here

Product Type: HDMI Extenders

Vendor: Crestron

SKU: HD-MD-4K-200 KIT



The Crestron HD-MD-4K-200 provides a cost-effective multimedia presentation solution for classrooms and meeting spaces. Consisting of a transmitter (HD-TX-101-C-E) and receiver (HD-RX-4K-210-C-E), the HD-MD-4K-200 extends an HDMI signal over a CATx (CAT5e or higher) twisted pair cable. For resolutions up to 2K, the maximum transmission distance is 230 ft (70 m). For higher resolutions up to 4K, the maximum transmission distance is 130 ft (40 m).1
The transmitter provides one HDMI input. The receiver provides an additional HDMI input that can be connected to a local AV source or to an optional Crestron media presentation wall plate (MP-WP152, sold separately).

Automatic Switching of Inputs
Automatic switching between the HDMI input on the transmitter and the HDMI input on the receiver can occur based on the last connected input or on the routing priority assigned to each input. Switching behaviour is configurable using the web interface or programmable using a Crestron control system. In addition to automatic switching, input selection push buttons on the receiver enable the desired input to be selected manually.

HDMI Output with 4K Scaler
A single HDMI output with a built-in scaler connects the receiver to a display or other device with an HDMI input. Input resolutions are automatically scaled to match the native resolution of the display device, resulting in optimal image quality. For applications requiring comprehensive EDID management, the web interface can be used to ensure that every input is displayed at its optimal resolution and format. Input resolutions up to 4K60 4:2:0 are supported.

Audio De-embedding
The analog audio output on the receiver enables the HD-MD-4K-200 to extract the stereo audio signal from digital sources to feed a sound bar, amplified speakers, or a separate sound system. The analog audio output is active only when the input is receiving a 2-channel stereo signal.

Device Control
Equipped with onboard control ports, the receiver can control various devices in a room. The COM (RS-232) port and CEC over the HDMI output can enable the display device to be turned on or off automatically without the use of a control system. With the use of a control system, the IR port can also control the display device. Two relay ports are provided for controlling a projection screen and other low-voltage contact closure activated equipment. Two Versiport I/O ports enable the integration of devices such as power sensors and motion detectors. An Ethernet port connection to a LAN also provides control by enabling use of the built-in web interface as well as connection to a control system.

USB Power Port
A USB power port is included on the transmitter to power USB powered devices (500 mA maximum).
AV Framework™ Technology Support
In addition to a built-in web interface and control system programming, the built-in. AV Framework technology of the MPC3-201 and MPC3-302 control systems can be used to control the HD-RX-4K-210-C-E as a switcher. (For information about. AV Framework technology.

XiO Cloud Service Support
The HD-MD-4K-200 is compatible with is compatible with the  XiO Cloud service, which is an IoT (Internet of Things) platform for remotely provisioning, monitoring, and managing Crestron devices across an enterprise or an entire client base. Built on the Microsoft Azure software platform and using industry-leading Azure IoT Hub technology, the XiO Cloud service enables installers and IT managers to deploy and manage thousands of devices in the amount of time it previously took to manage a single device. Unlike other virtual machine-based cloud solutions, Azure services provide unlimited scalability to suit the ever-growing needs of an enterprise.

Native Integration with Cisco Webex and Touch 10 Devices
Native integration of the Cisco API enables source inputs of the HD-RX-4K-210-C-E to be added to  a compatible Cisco Webex video conference system that is controlled by a Cisco Touch 10 control unit. Eliminating the need for control system programming, integration with Cisco devices is accomplished by using the Crestron Configuration tool, which is hosted on the Crestron. Configuration includes the selection of the desired Crestron and Cisco hardware models and the assignment of HD-RX-4K-210-C-E input names and icons for use on the Cisco Touch 10 screen. The resulting configuration file is then downloaded from the website and loaded to the HD-RX-4K-210-C-E using the HD-RX-4K-210-C-E web interface. Communication is established between the HD-RX-4K-210-C-E and Cisco devices, enabling the Cisco Touch 10 to display and control the additional HD-RX-4K-210-C-E inputs.

Low-Profile Installation
The transmitter and receiver can be placed on or attached to a flat surface. The transmitter can fit discreetly inside a presentation lectern or be attached to the underside of a table. The receiver can be mounted onto a wall behind a display or onto a ceiling above a projector. The devices can also be attached to a rack rail of an equipment cabinet.

  • 4K/60 4:2:0 capability
  • Transmitter and receiver with 2x1 AV switching, scaling, and signal extension functionality
  • One HDMI® input on transmitter and one HDMI input on receiver
  • One 4K scaling HDMI output on receiver
  • Automatic switching of inputs
  • Signal extension of video, audio, and power over a CATx cable—up to 230 ft (70 m) for resolutions up to 2K or up to 130 ft (40 m) for higher resolutions up to 4K
  • EDID management
  • HDCP 2.2 management
  • Stereo audio de-embedding via the analog audio output
  • IR, RS-232, relay, and I/O control ports
  • CEC (Consumer Electronics Control) capability
  • Gigabit Ethernet connectivity
  • USB power port
  • Built-in web interface for easy configuration and monitoring
  • Compatibility with Crestron® 3-Series® or later control systems
  • .AV Framework™ technology support
  • XiO Cloud® service support
  • Native integration with Cisco Webex® and Touch 10 devices
  • Low-profile installation
  • 100-240 VAC power pack included
Video
Switcher 2x1 (1 input at transmitter plus 1 input at receiver x 1 output at
receiver) auto-switching or manual, audio-follows-video, Crestron
Auto-Locking® and QuickSwitch HD™ technology
Scaler, HDMI Output 4K video scaler with intelligent frame rate conversion, Deep Color support,
content adaptive noise reduction, 3:2/2:2 pull-down detection and recovery
Input Signal Types HDMI with Deep Color and 4K (DVI and Dual-Mode DisplayPort™ interface
compatible2)
Output Signal Types HDMI with Deep Color and 4K (DVI compatible3)
Copy Protection HDCP 2.2
Maximum Resolutions Common resolutions are listed in the following table.
[TABLE]
*NOTES:*

- *Common resolutions are supported at pixel clock rates up to 300 MHz.*
- *Interlaced video sources are not supported.*
Scaler Resolutions, HDMI Output Auto (EDID preferred)
1280x720p@50Hz (720p50)
1280x720p@60Hz (720p60)
1920x1080i@25Hz (1080i25)
1920x1080i@30Hz (1080i30)
1920x1080p@30Hz (1080p30)
1920x1080p@25Hz (1080p25)
1920x1080p@24Hz (1080p24)
1920x1080p@50Hz (1080p50)
1920x1080p@60Hz (1080p60)
3840x2160p@24Hz
3840x2160p@25Hz
3840x2160p@30Hz
4096x2160p@24Hz
4096x2160p@25Hz
4096x2160p@30Hz
3840x2160p@50Hz
3840x2160p@60Hz
4096x2160p@50Hz
4096x2160p@60Hz
Audio
Input Signal Types HDMI (Dual-Mode DisplayPort interface compatible2)
Output Signal Types HDMI, analog stereo
Digital Formats 2-channel LPCM
Analog Formats Stereo 2-channel
Digital-To-Analog Conversion 24-bit 48 kHz
Output Impedance 200 ohms balanced, 100 ohms unbalanced
Maximum Output Level 4 Vrms balanced, 2 Vrms unbalanced
Output Volume -80 to +20 dB level adjustment range, plus Mute
Mute Enable or disable independently for HDMI and analog audio output
Analog Output Performance Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
S/N Ratio: >95 dB @ 10 dBV, 20 Hz to 20 kHz, A-weighted
THD+N: <0.005% @ 1 kHz and 10 dBV
Stereo Separation: 20 Hz to 20 kHz ≤80 dB
Acoustic Noise Not applicable (fanless)
Communications
Ethernet 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half
duplex, CIP, DHCP, web browser setup and control
RS-232 2-way device control and monitoring up to 115.2k baud with hardware and
software handshaking
IR 1-way device control via infrared up to 60 kHz
HDMI HDCP 2.2, EDID, CEC
DM Lite HDCP 2.2, EDID
Connectors – Transmitter (HD-TX-101-C-E)
24 VDC 1.25A (1) 2.1 x 5.5 mm DC power connector;
24 VDC power input;
PW-2412WU power pack included

*NOTE: The power pack can power both the transmitter and the connected
HD-RX-4K 210-C-E receiver. A power pack must not be connected to both
devices simultaneously.*
TO RX (DM Lite) (1) 8-pin RJ-45 connector, female, shielded;
DM Lite® link port for connection to the HD-RX-4K-210-C-E receiver1
HDMI IN (1) HDMI Type A connectors, female;
HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface
compatible2)
POWER ONLY (1) USB Type A connector, female;
USB power port (500 mA maximum output);
Supplies power to a USB powered device
Connectors - Receiver (HD-RX-4K-210-C-E)
HDMI INPUT 1 (1) HDMI Type A connector, female;
HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface
compatible2)
DM Lite INPUT 2 (1) 8-pin RJ-45 yellow connector, female, shielded;
DM Lite link port for connection to the HD-TX-101-C-E transmitter1
HDMI OUTPUT (1) HDMI Type A connector, female;
HDMI digital video/audio output (DVI compatible4)

*NOTE: CEC over the HDMI output provides Power On/Off control of the
display device without a control system or full programmable control of any
device with a control system.*
AUDIO L/R (1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced;
Output Impedance: 200 ohms balanced, 100 ohms unbalanced
Ethernet (1) 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port
I/O 1-2 (2) 2-pin detachable terminal blocks;
Comprised of 2 Versiport digital input/output or analog input ports
(referenced to GND);
Digital Input: Rated to 0-24 VDC, input impedance 20k ohms, logic threshold
>3.125 V low/0 and <1.875 V high/1;
Digital Output: 250 mA sink from maximum 24 VDC, catch diodes for use with
real world loads;
Analog Input: Rated for 0-10 VDC, protected to 24 VDC maximum, input
impedance 21k ohms with pull-up resistor disabled;
Programmable 5 V, 2k ohms pull-up resistor per pin
RELAY 1-2 (2) 2-pin detachable terminal blocks;
Comprised of 2 normally open, isolated relays;
Rated 1 A, 30 VAC/VDC;
MOV arc suppression across contacts
IR (1) 2-pin 3.5 mm detachable terminal block;
IR output control port;
Supports IR up to 60 kHz;
IRP2 emitter sold separately

*NOTE: The IR port provides Power On/Off control of the display device with
the use of a control system.*
COM (1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Supports RS-232 up to 115.2k baud with hardware and software handshaking

*NOTE: The COM port provides Power On/Off control of the display device
without a control system or full programmable control of any device with a
control system.*
24VDC 1.25A
(1) 2.1 x 5.5 mm DC power connector;
24 VDC power input;
PW-2412WU power pack included

*NOTE: The power pack can power both the HD-RX-4K-210-C-E receiver and the
HD-TX-101-C-E transmitter. A power pack must not be connected to both
devices simultaneously.*
SERVICE (1) USB Type A connector, female;
For factory use only
Transmitter (HD-TX-101-C-E)
PWR (1) Green LED, indicates that power is being applied to the HD-TX-101-C-E
from the power pack connected to either the HD-TX-101-C-E or the receiver
HDMI IN (1) Green LED, indicates HDMI input signal presence
LINK (1) Green LED, indicates the DM Lite link status
TO RX (2) LEDs on RJ-45 connector. Green LED indicates DM Lite link status. Amber
LED indicates a valid video signal.
Controls and Indicators - Receiver (HD-RX-4K-210-C-E)
PWR (1) LED, indicates that power is being applied to the HD-RX-4K-210-C-E from
the power pack connected to either the HD-RX-4K-210-C-E or the transmitter.
Amber indicates that the HD-RX-4K-210-C-E is booting. Green indicates that
the HD-RX-4K-210-C-E is operational.
INPUT 1 – 2 (2) Push buttons for manual input selection and (2) LEDs. Green indicates
that video is switched. Amber indicates that video is detected but is not
switched.
AUTO (1) Push button to enable or disable automatic switching and (1) green LED
to indicate that automatic switching is enabled
SETUP (1) Red LED and (1) push button for display of IP address on the HDMI output
DM Lite (2) LEDs on RJ-45 connector. Green indicates that a DM Lite link is
established. Flashing amber indicates non-HDCP video, and solid amber
indicates HDCP video.
Ethernet (2) LEDs on RJ-45 connector. Green indicates that an Ethernet link is
established. Flashing amber indicates Ethernet activity.
Power
Power Pack
(Included with Transmitter and Receiver)
Input: 100-240 VAC, 50/60 Hz
Output: 1.25 A @ 24 VDC
Model: PW-2412WU

*NOTE: A single power pack powers both the transmitter and receiver. A
power pack must not be connected to both devices simultaneously.*
Power Consumption 14.8 W typical
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity Transmitter: 20% to 90% RH (non-condensing);
Receiver: 10% to 90% RH (non-condensing)
Heat Dissipation 50.5 BTU/hr
Enclosure
Chassis Metal, black finish, vented sides, 2 mounting flanges
Mounting Surface or rack rail mount
Dimensions - Transmitter (HD-TX-101-C-E)
Height 1.26 in. (32 mm)
Width 4.21 in. (107 mm) with integral mounting flanges
Depth 4.05 in. (103 mm)
Dimensions - Receiver (HD-RX-4K-210-C-E)
Height 5.11 in. (130 mm)
Width 10.53 in. (268 mm) with mounting flanges attached
Depth 1.10 in. (28 mm)
Weight
Transmitter 9.2 oz (281 g)
Receiver 2.3 lb (1.05 kg)
Compliance
UL® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device

Part Code

HD-MD-4K-200 KIT

 

Recently viewed product

You can control fully on this carousel from store admin as describe in above section

Loading...