Crestron HD-RXC-101-C-E DM Lite – HDMI over CATx Receiver w/IR & RS-232, Surface Mount

Stock Alert:Click here

Product Type: HDMI Extenders

Vendor: Crestron

SKU: HD-RXC-101-C-E



The HD-RXC-101-C-E is a surface-mountable DM Lite receiver designed to pair with a DM Lite transmitter to form a point-to-point signal extender for HDMI, RS-232, and IR signals. The DM Lite family of products offers a very simple and versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or better) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K. In addition to video and audio, the HD-RXC-101-C-E supports the extension of RS-232 and IR control signals in either direction.[1]
For applications requiring a wall plate version, refer to the HD-RXC-101-C-1G-E-B-T.
For applications that do not require IR or RS-232 signal extension, refer to the HD-RX-101-C-E.
The HD-RXC-101-C-E is designed to mount on a wall behind a flat-panel display, on the ceiling above a projector, or on any other flat surface. It can also be attached to a single rack rail in the back of an equipment cabinet. When powered using the provided wall mount power pack, the HD-RXC-101-C-E also supplies power to the connected transmitter over the link cable. Alternately, a power pack may be connected to the transmitter, which in turn supplies power to the HD-RXC-101-C-E over the link cable.[2]
Important: This product is not addressable from a control system and offers no programmable functionality. AV, CEC, IR, and RS-232 signals are simply passed through between a single transmitter and receiver pair. The RJ45 link port on this product is exclusively intended for linking with a single DM Lite transmitter. It should not be used to connect to any other equipment or network. DM Lite is not compatible with PoE, PoDM, DigitalMedia 8G+ (DM 8G+), or HDBaseT.

  • Pairs with a DM Lite transmitter to provide a simple point-to-point signal extender
  • Enables extension of HDMI®, RS-232, and IR signals
  • Links to the transmitter via a single CAT5e (or better) twisted pair cable[1]
  • Supports 4K and UHD at up to 130 ft (40 m)
  • Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)
  • Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
  • Handles 3D video and Deep Color
  • Supports Dolby TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
  • Compatible with HDMI and DVI display devices[3]
  • HDCP 2.2 compliant
  • Passes CEC and EDID signals
  • Extends bidirectional RS-232 and IR control signals
  • Low-profile surface mount design
  • Universal 100-240V power pack included
Video
Output Signal Type HDMI w/Deep Color, 3D, & 4K (DVI compatible [3])
Copy Protection HDCP 2.2
Maximum Resolutions
[TABLE]
*NOTE: Common resolutions are shown; other custom resolutions are supported
at pixel clock rates up to 300 MHz*
Audio
Output Signal Type HDMI
Formats
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby
Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio,
DTS:X, LPCM up to 8 channels
Communications
HDMI HDCP 2.2, EDID, CEC pass-through
RS-232 2-way serial pass-through up to 115.2k baud (TD/RD only)
IR Bidirectional IR signal pass-through up to 60 kHz
DM Lite Link Proprietary link for connection between one DM Lite TX & RX only
Connectors
24VDC 1.25A (1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2412WU power pack included;
*Note: This connection powers both the receiver and transmitter [2]*
FROM TX (1) 8-pin RJ45 connector, female, shielded;
Link port for connection to a DM Lite transmitter [1]
HDMI OUT (1) HDMI Type A connector, female;
HDMI digital video/audio output (DVI compatible [3])
IR IN/OUT (1) 4-pin 3.5 mm detachable terminal block;
Comprises (1) IR input port and (1) IR output port;
IR IN is for connection from a Crestron IR control port or other IR signal
source and passes the IR input signal to the IR OUT port on the TX;
IR OUT is for connection to an IR emitter (IRP2, sold separately) and
transmits the IR signal from the IR IN port on the TX;
Supports IR up to 60 kHz
COM (1) 3-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Passes RS-232 TD/RD data to/from the COM port on the TX;
Supports up to 115.2k baud
Indicators
PWR (1) Green LED, indicates operating power is supplied from the power pack
via the 24VDC input or from the TX via the DM Lite link
HDMI OUT (1) Green LED, indicates HDMI output signal presence
LINK (1) Green LED, indicates the DM Lite link status
FROM TX (2) LEDs (on RJ45 connector), green LED indicates link status, amber LED
indicates a valid video signal
Power
Power Pack (included) Input: 100-240 Volts AC, 50/60 Hz;
Output: 1.25 Amps @ 24 Volts DC;
Model: PW-2412WU
*Note: The receiver and transmitter are powered together using a single
power pack connected at either the receiver or transmitter (not both).[2]*
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 20% to 90% RH (non-condensing)
Construction
Chassis Metal, black finish, with (2) integral mounting flanges, vented sides
Mounting Freestanding, surface mount, or attach to a single rack rail
Dimensions
Height 1.26 in (32 mm)
Width 4.21 in (107 mm)
Depth 4.07 in (104 mm)
Weight
9.95 oz (282 g)
Compliance
UL Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device
Maximum DM Lite Link Cable Lengths
[TABLE]

Part Code

HD-RXC-101-C-E

Recently viewed product

You can control fully on this carousel from store admin as describe in above section

Loading...