FP-UMX-TPS-TX130 is a floor panel with HDMI, DisplayPort and VGA input ports, transmitting signals at a resolution of up to 4K together with audio and control up to a range of 170 m over a single CAT5 or better class cable.
This transmitter was designed for digital and analog video and audio signals:VGA YprPb, HDMI 1.4 and DP 1.1 with analog stereo audio from local input or embedded 7.1 HBR audio and also handles HDCP encryption. Analog signals (both audio and video) are converted to a digital format and can be transmitted separately.
Using the factory, custom or transparent EDID emulation, the user can fix and lock EDID data on each input connector. Advanced EDID Management forces the required resolution from any video source and fixes the output format conforming to the system requirements.
The unit offers bi-directional and transparent IR, RS-232 and Ethernet transmission. IR and RS-232 connections support command injection, allowing the sending of any IR or RS-232 control command directly via the LAN connection.
Remote powering is available through the single CAT cable, but local power supply can also be used. The device can be mounted on a rack shelf or used standalone. The device is compatible with both HDBaseT extenders and matrix boards.
- Built-in Event Manager control automation feature
- 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- Audio embedding (or replace original audio)
- Ethernet extension (100 Mbps)
- Command injection on RS-232 and IR ports
- Extends VGA, DVI, HDMI 1.4 or DP 1.1 + Audio + Ethernet + RS-232 + IR over one CAT5/6/7 cable
- Bi-directional RS-232 and IR extension (pass-through and control)
|Resolution:||Up to 4K UHD 3840×2160@30Hz, 1600x1200@60Hz, FullHD 1920x1080@60Hz|
|Digital audio formats:||Supports up to 8 channel PCM, Dolby TrueHD and DTS-HD Master Audio 7.1 formats|
|Input cable equalization:||Automatic max 20 m|
|EDID emulation:||Yes, Advanced EDID Management|
|EDID memory:||119 factory preset, 15 user programmable|
|VGA to digital conversion:||0 microseconds delay|
|HDCP pass-through: Yes|
|RS-232 pass-through:||Yes, configurable|
|RS-232 (control option):||4800, 9600, 19200, 38400, 57600, 115200 Baud Rx,Tx (local or through CATx)(default: 57600)|
|Local power:||2-pole, DC 48V 500mA|
|Power over TPS:||DC 48V 0.25A|
|Power consumption:||8,5W (typ)|
|Digital video input:||HDMI connector, DisplayPort|
|Analog video input:||VGA connector|
|Audio input:||3.5 mm stereo jack|
|Ethernet:||1 x RJ45|
|TPS output:||1 x RJ45|
|Serial port:||3-pole PHOENIX|