Lightware HDMI-TPS-RX120-HDSR HDBaseT Compatible HD Video Scaler and Receiver with Local HDMI Input

Product Type: Extenders

Brand: Lightware


DMI-TPS-RX120-HDSR is a TPS (HDBaseTTM) receiver with a local HDMI input and a built-in HD video scaler. Conversion between common formats and frame rates are supported. The connected display sink receives continuous HDMI signal from the scaler even when a switching in the input signal occurs.

The unit scales any incoming resolution to fixed output resolutions of maximum 1920x1200@60Hz (RB) or FullHD 1920x1080@60Hz. It performs with low latency, providing visually seamless switching on output; HDMI, HDCP and DVI compliant, and allows connecting from 155 m in Long Reach Mode and 120 m in automatic mode. It also handles RS-232 for monitor control, Ethernet control, local hdmi input switching, optional IR remote controller for easy setup:HDMI-TPS-RX120-HDSR has a local HDMI input with a built-in switcher to select source, its configuration appears as OSD (On-Screen-Display) messages on the connected display, and can be adjusted using the front panel buttons.

The device is compatible with all HDBaseT compatible Lightware TPS transmitters and matrix switchers, its features include factory loaded EDID memory slots and Pixel Accurate Reclocking. This scaler can be controlled by the Lightware Device Controller software, which can perform any adjustment using a connected computer via  RS-232.

The device can be used standalone or mounted on a rack, on truss, or a piece of furniture, it's rack ears are compatible with the VESA mounting standard. As an optional extra accessory, a remote controller is also available to control basic functions

  • Scaling of video signals to match the properties of the target display/sink
  • HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
  • HDCP 1.4 compliant
  • TPS link quality and cable length monitoring
  • Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
  • Firmware upgrade through USB
  • Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
  • HDBaseT compatible
  • Ethernet extension (100 Mbps)
  • Transparent EDID pass-through
  • Pixel Accurate Reclocking
  • Uncompressed video up to 6.75 Gbps datarate (225 MHz pixel clock)
  • Device control via Ethernet (TCP/IP) and RS-232
  • Multiple TCP/IP connections
  • Intuitive control software for device configuration
  • No video compression
  • Bi-directional RS-232 and IR extension (pass-through and control)
  • External universal power adaptor
  • Mounting options for rack, furniture or truss
  • Extends DVI or HDMI 1.4 + Audio + Ethernet + RS-232 + IR over one CAT5/6/7 cable
Maximum Resolution: 1920x1200@60Hz (RB), FullHD
Video latency 2-3 frames ( = 33 .. 50ms @ 60Hz )
Audio latency 0ms, 40ms (default), 110ms, 150ms config-
Digital audio formats: Supports 2 channel PCM and AC3 5.1 formats
(other possible formats are
being tested and added)
Rack mountable, removable rack ears
Input cable equalization: Automatic max 155 m (155 m LR, 120m HDBT)
EDID emulation: Built-IN EDID
EDID memory: No
HDCP pass through: Yes
RS-232 pass-through: Yes
  RS-232 (control option):         9600 (local or through TPS)                                  
Local power: 4-pole, DC 24V, 600mA
Power over TPS: No
Power consumption: 17W
Dimensions: 160 W x 191.7 D x 30 H mm (LW case)
Enclosure: 1 mm metal
Weight: ~800 g / product (estimate)
Compliance: CE
Warranty: 3 years

Part Code


Recently viewed product

You can control fully on this carousel from store admin as describe in above section