Lightware  HDMI20-OPTC-TX220-NTQ Full 4K Fiber Optical Extender with Gigabit Ethernet India

Lightware HDMI20-OPTC-TX220-NTQ Full 4K Fiber Optical Extender with Gigabit Ethernet

Product Type: Extenders

Brand: Lightware


The HDMI20-OPTC-TX/RX220-NTQ is a HDMI 2.0 compatible, HDCP 2.2 compliant extender pair for video, RS-232 and Gigabit Ethernet signals, supporting uncompressed 4K UHD resolution at 60Hz 4:4:4. This extender pair is particularly recommended for rental and staging applications, 4K live events, and for future-proof operation centers. The extender can transmit HDMI 2.0 signals with 18Gbps over one multimode fiber to a distance of up to 700 meters. Video and Ethernet signals are transferred over a single optical line.

Using the factory, custom or transparent EDID emulation the user can fix and lock EDID data on the HDMI connector. Advanced EDID Management forces the required resolution from any video source and fixes the output format conforming to the system requirements. The unit offers bi-directional and transparent RS-232 transmission and two separate Gigabit Ethernet signals over the fiber connection.

All devices can be mounted on a rack shelf or used standalone, rack ears also serve easy handling and bump protection, mounting threads on top and one of the sides to conform strict installation safety regulations.

The device features Pixel Accurate Reclocking, a Lightware technology to eliminate jitter and skew generated by low quality sources and multiple daisychained devices. Single fiber technology makes these units fully HDMI compliant without need of a second fiber cable or copper connections.

Galvanic isolation between source and display helps avoiding ground loops and hum effects. No delay occurs in the signal during optical conversion, the video image is transported without frame latency. This feature is crucial in 3D applications and systems where audio is processed separately.


  • Extension distance up to 700 meters (with OM3/OM4 fiber, 4096x2160p60)
  • Built-in Event Manager control automation feature
  • Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
  • Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
  • HDMI 2.0, HDMI 1.4 and DVI 1.0 compliant
  • HDCP 2.2 compliant (transparent pass-through)
  • Bi-directional RS-232 extension (pass-through and control)
  • No signal latency, zero frame delay
  • Single Fiber Technology
  • Dual output with built-in distribution amplifier
  • Uncompressed video up to 18 Gbps datarate (600 MHz pixel clock)
  • 4096x2160@60Hz/4:4:4 maximum resolution (600MHz)
  • Firmware upgrade through Ethernet
  • Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
  • Extension distance up to 2500 meters (with OM3 fiber, 1920x1080p60)
  • Advanced EDID Management
  • Command injection on RS-232 and IR ports
  • Front panel LCD menu and buttons for crosspoint control
  • Multiple TCP/IP connections
  • Intuitive control software for device configuration
  • Device control via Ethernet (TCP/IP), RS-232 and USB
  • HDR and Dolby Vision support
  • No video compression
  • Built-in universal power supply
  • Directly mountable in 19" rack
  • Breakout LC connector for Neutrik OpticalCON Duo unused fiber channel
  • EtherCON ruggedized LAN connector
  • Active fan cooling
  • Front to back cooling airflow


Optical Connectors

Power Inlet


HDMI Ports

Serial port



1x Neutrik OpticalCON DUO

IEC 60320-C14

2x EtherCON for Gigabit Ethernet (control & pass-through)

TX: 2x HDMI 2.0 input (18G) and 1x HDMI 2.0 output (18G)   

RX: 2x HDMI 2.0 output (18G) and 1x HDMI

2.0 output (9G)

D-SUB 9 male (DE-9M) for RS-232 (control or pass-through)

Mini USB B


1x Neutrik OpticalCON Quad


1x Fiberfox


1x Neutrik OpticalCON DUO

Neutrik Powercon True1

Max Video Data rate

 18 Gbps

Max Resolution

 Up to 4K UHD 3840×2160@60Hz

Video delay

 0 frames

HDR Modes

 HDR 10, HDR 12 and Dolby Vision


HDCP 2.2 compliant

EDID emulation

 Advanced EDID Management

EDID memory

 Factory preset and user-programmable

EDID support

 256 byte Extended EDID

Front panel control

Jog Dial and select button on TX
Select button on TX
Function button on RX

Visual feedback on TX and RX units

LCD menu for EDID setup and status check on TX.

TX status LEDS


RX status LEDs


RS-232 pass through

 Bi-directional 9.6, 14.4, 19.2, 38.4, 57.6 kBauds


 LC duplex, LC simplex for channel breakout

Laser wavelengths

 6 channel CWDM

High speed lanes

 778; 801; 824; 850 nm

Low speed lanes

 911; 980 nm

Laser class specification

 Class 3R

Power supply

 Internal AC/DC power supply


 bottom and back 1 mm metal, top and front 1,5 mm metal


 1RU height x ½ rack width




 3 years

Part Code


Recently viewed product

You can control fully on this carousel from store admin as describe in above section