VINX-120AP-HDMI-ENC-DNT features Dante audio capability and also offers independent AES67 support. This allows operators to easily adopt to any scenario where audio signal management is in focus, besides of video capabilities.
Video signals can be expanded from a simple point-to-point application to unlimited endpoints for ultimate virtual matrix switching, digital signage and signal extension. The extenders include our Advanced EDID Management system, are HDCP compliant and decoders are capable of scaling the video signal up to the maximum supported resolution of 4K UHD @ 30 Hz. RS-232 and IR control channels are also supported, the built-in USB ports support KVM function and can handle USB 2.0 mass storage as well.
These models feature options for fiber optical transmission in the form of an SFP port, audio embedding and de-embedding, and also return audio features. These VINX devices can be powered remotely by PoE, PoE+ and UPoE. Contrary to common belief, PoE systems, like VINX, can run on much less power than PoE+ devices, contributing to carbon footprint reduction and energy saving. The VINX-120AP-HDMI-ENC-DNT features a local HDMI output port for monitoring.
One of the most popular unique features of VINX is the Video Wall processing, significantly reducing the time needed to install a video wall compared to other systems. The feature options include gap and bezel adjustment, which can be performed in batches.
- HDMI Stereo embedded Audio can be de-embedded and converted to 2 channel Dante/AES67 streams
- Audio de-embedding to the dedicated RJ45 port connector complying with the Dante/AES67 standards
- SFP slot for Gigabit Ethernet video transmission
- Video Wall Processing
- Adjustable video stream bitrate
- Return audio for microphone (only in unicast mode)
- Extension distance up to 100 meters with CAT5e or CAT6
- Compact and silent design
- Audio embedding (or replace original audio)
- USB KVM (HID) extension
- Command injection on RS-232 and IR ports
- 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- Advanced EDID Management
- Intuitive control software for device configuration
- Device control via Ethernet (TCP/IP)
- Built-in website for device configuration
- Bi-directional RS-232 extension (pass-through)
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Firmware upgrade through Ethernet
- HDCP 2.2 and HDCP 1.4 compliant
- Local monitor output on transmitter
- Status LED for video signal detection
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- External universal power adaptor
- Can be remote powered through CATx cable (PoE PD)
| Specifications | |
| Component type | Encoder (Transmitter) |
| Max. Image Resolution | 3840 x 2160 @30Hz |
| Video Interface | HDMI Female (In), HDMI Female (Out, Loopback) |
| Audio interface | 3.5 mm stereo jack (In), 3.5 mm stereo jack (Out), Dante/AES67 RJ45 (out) |
| Scaling | No |
| Video Wall Wizard | Yes |
| Video delay: | 1.1 frames (source to sink) |
| EDID emulation: | Advanced EDID Management |
| EDID memory: | 53 factory preset, 5 user programmable |
| HDCP | Yes, HDCP 2.2 |
| USB Device | USB Type B |
| Network Interface | RJ45 Female, 1 Gbps SFP |
| Switch | 4 Position Dip Switch |
| IR | 3.5 mm Jack Female (IR Out) |
| RS-232 | 9-pole D-sub |
| Local Power | DC 12V |
| Power-over-Ethernet (PoE) | Yes, PD (Powered Device) |
| PoE, PoE+, PoE++ and UPoE | Yes |
| Acoustic Noise | 0 dB |
| Operation Temperature | 0-40°C |
| Storage Temperature | -20-60°C |
| Humidity | 0-90% RH, Non-condensing |
| Weight | 675g |
| Housing | Metal Enclosure |
| Dimensions (L x W xH) | 218.5 x 104 x 25 |
| Rack mountable: | Yes (1/2 RU width) |
| Compatible with VINX Power Tray | No |
| Safety/Emission | CE, FCC |
Part Code
VINX-120AP-HDMI-ENC
You May Be Interested In
You can manage this carousel from admin.You can stop autoplay, increase/decrease aniamtion speed and number of grid to show and products
Recently viewed product
You can control fully on this carousel from store admin as describe in above section
