Shure MXCWAPT-W Access Point Receiver

Stock Alert:Click here

Product Type: Wireless Conference Unit

Vendor: Shure

SKU: MXCWAPT-W



The MXCWAPT-W Access Point Receiver from Shure is a hub for the Microflex Complete Wireless Conference System designed to operate anywhere in the world. It can be used to manage audio routing, frequency coordination, and system control for up to 125 wireless conference units.

The MXCWPT-W scans the 2.4 and 5 GHz frequency bands and identifies the clearest channel. It then conveys that information to the conference units. The system takes advantage of limited-access DFS spectrum to expand the number of available channels. If a conflict is identified, the Access Point instructs all conference units to change channels. It features AES-128 encryption for enhanced privacy.

Furthermore, this Access Point includes a Dante networked audio connection that supports up to 10 input and 10 output channels. Analog XLR audio input and output allow for connection of a wireless microphone for a presenter or an external sound reinforcement system for an audience.

The MXCWAPT-W includes an information display and controls for basic system configuration without a laptop. It is powered by a standard PoE switch or power injector. Finally, it can be mounted on the wall or ceiling with the included mounting bracket and paintable cover or placed on a table for temporary meetings.

  • Controls up to 125 MXCW640 wireless conference units
  • Bidirectional wireless connection provides audio to and from conference units and enables real-time control of all settings
  • Operates in 2.4/5 GHz frequency bands, including DFS spectrum
  • Automatic frequency coordination, interference detection and avoidance
  • Dante digital audio (10 inputs/10 outputs)
  • Analog audio input and output (XLR)
  • One Ethernet cable for audio, control, and PoE power
  • AES-128 encryption for enhanced privacy
  • Display for basic system configuration without a laptop
  • LEDs indicate power, wireless connection, and network status
  • Includes wall/ceiling mounting plate
Analog Audio Inputs Configurable via Settings
Maximum Input Level 24.9 dBV (1% THD+N. Measured at Dante Output. Line Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB)
10.3 dBV (1% THD+N. Measured at Dante Output. Aux Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB)
Frequency Response 22 Hz to 20 kHz (+0.5 dB/-3 dB, Measured at Dante Output. -6 dBFS Input, Line Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB)
22 Hz to 20 kHz (+0.5 dB/-3 dB, Measured at Dante Output. -6 dBFS Input, Aux Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB)
Total Harmonic Distortion/Noise 0.03%, Typical (Measured at Dante Output. -6 dBFS Input, 1 kHz, Line Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW)
0.02%, Typical (Measured at Dante Output. -6 dBFS Input, 1 kHz, Aux Level, AnalogInput Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW)
Dynamic Range 115 dB [A-Weighted, 113 dB (Unweighted), Typical Measured at Dante Output. Line Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW]
112 dB [A-Weighted, 110 dB (Unweighted), Typical Measured at Dante Output. Aux Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW]
Equivalent Input Noise Preamplifier
-92 dBV (A-Weighted, Typical Line Level, Analog Input Gain = 0 dB, 22 Hz to 22 kHz BW)
-104 dBV (A-Weighted, Typical Aux Level, Analog Input Gain = 0 dB, 22 Hz to 22 kHz BW)
Connector Type XLR-3-Pin Female (Pin 1 = Ground, Pin 2 = Audio +, Pin 3 = Audio -)
Analog Audio Outputs Digital on 2.4 GHz
Maximum Output Level 4.3 dBV (1% THD+N. Audio Injected at Dante Input. Dante Input Gain = 0 dB, Analog Output Gain = 0 dB)
Frequency Response 1 Hz to 20 kHz (+0.5 dB/-3 dB) Audio Injected at Dante Input. -6 dBFS input, Dante Input Gain = 0 dB, Analog Output Gain = 0 dB
Total Harmonic Distortion/Noise 0.01% (Typical, Audio Injected at Dante Input. -6 dBFS input, 1 kHz, Dante Input Gain = 0 dB, Analog Output Gain = 0 dB, 22 Hz to 22 kHz BW)
Dynamic Range (Typical) 100 dB [A-Weighted, 97 dB (Unweighted), Typical Audio Injected at Dante Input. Dante Input Gain = 0 dB, Analog Output Gain = 0 dB, 22 Hz to 22 kHz BW]
Load Impedance >600 Ohms, Typical
Connector Type 3-Pin XLR Male [Standard XLR Pinout (Pin 1 = Ground, Pin 2 = Audio +, Pin 3 = Audio -]
Ground Lift XLR GND Lift Switch Position - "Left (Pin 1-GND Connected) Right (Pin 1-GND Disconnected)"
Equivalent Noise Level -104 dBV [A-Weighted, Typical Aux Level, Analog Input Gain = 0 dB, 22 Hz to 22 kHz BW] Input Impedance 10 Kilohms Line Level
Input Impedance 10 Kilohms, Line Level
12 Kilohms, Aux Level
Configuration Balanced
RF Specification
IEEE WLAN Standard IEEE 802.11 a, g
Frequency Bands 2.4 GHz ISM , 5 GHz UNII
Sensitivity -80 dBm at 10% PER
RF Output Power 1 mW (Low), 5 mW (Medium), 13 mW (High), 25 mW (Maximum)
Antenna Type Proprietary Internal Bi-Level Dual-Band (PIFA), Patent Pending
Power
Supply Type Power over Ethernet (PoE) 802.2 af, Class 0 PD
Supply Voltage 37 to 57 V
Power Consumption 12.95 W Maximum , 6.5 W Typical
Network
Interface Gigabit Ethernet, Dante Digital Audio
Link Speed: 10/100/1000 Mb/s
Network Addressing Capability DHCP or Manual IP Address
Cable Length 328' / 100 m Maximum
Cable Type Cat 5e or Higher
Display
Type Monochrome FFSTN LCD
Display Size 1.84 x 0.074" / 46.7 x 18.8 mm
Display Resolution 152 x 78 (78 ppi)
General
Housing Molded Plastic , Die-Cast Aluminum
Mounting Ceiling Bracket or Wall
Operating Temperature Range 19.4 to 120.2° F / 7 to 49° C
Storage Temperature -20.2 to 140° F / -29 to 60° C
Dimensions 1.88 x 9.55 x 9.52" / 47.8 x 242.5 x 241.8 mm
Weight 2.54 lb / 1.15 kg

Part Code

MXCWAPT-W

Recently viewed product

You can control fully on this carousel from store admin as describe in above section

Loading...